indexing-hanger-type-shot-peening-machine-500×500 (1)

Indexing Hanger Type Shot Peening Machine

This machine is
especially suitable for automotive, aerospace industries for shot Peening of components such
as big gears, gear shafts , crank shafts, axles etc. The Shot peening intensity of 0.7mm on ‘A’
Almen Strips are attained in 3 minute cycle.
Entire Cabinet & Hanger is manufactured with Mn Steel to protect front wear & abrasion & thus
gives a long life to the machine. The machine is suitable for a hanger drum of Size ᴓ

Product Description

This machine is
especially suitable for automotive, aerospace industries for shot Peening of components such
as big gears, gear shafts , crank shafts, axles etc. The Shot peening intensity of 0.7mm on ‘A’
Almen Strips are attained in 3 minute cycle.
Entire Cabinet & Hanger is manufactured with Mn Steel to protect front wear & abrasion & thus
gives a long life to the machine. The machine is suitable for a hanger drum of Size ᴓ

400mmx1200mm. Four such Mn hangers are provided on an Indexing Hanger Module of ᴓ
1500mm. One Hanger is at loading and unloading station while the hanger opposite to loading
unloading station is the Shot Peening station. Balance two stations are idle & Air Wash Station.
The Machine is provided with 3 no. Blast Wheel Strategically placed to cover the defined hanger
size of 1200 mm length and 400 mm dia. Each blast wheel is powered by 15 H.P. motor and fires
Ten Tons Shots per hour per wheel. All the Blast Wheels are provided with Variable A.C. Drive to
control the Shot velocity while Peening. The Hanger rotation is also provided with variable A.C.
drive to control rotation of the hanger.
Matching Shot Recovery system is provided with Screw Conveyor, Bucket Elevator, Rotary
Screen Separator, and Vibratory Classifier with Sensors to give feedback of precise working of
each application. Machine is equipped with Magna valve to control the shot flow rate. The
machine has an intelligent PLC controlling system where the Shot flow rate of each Blast Wheel
is permitted in a given band width. Alarms are generated if shot flow rate is less or more than the
pre-set limits.
The Shot Peening Machine is programmed for recipe. Just select the recipe No. and all set
parameters like BW Speed, Hanger rpm Peening Time will be automatically selected by the PLC.
A touch Screen user friendly HMI is provided with the machine to display various parameters and
operation being run on the machine.

Reviews

There are no reviews yet.

Be the first to review “Indexing Hanger Type Shot Peening Machine”